T3PA-Pro

Sort By:  
Convert your T3PA, T-GT and T3PA Pro pedals into a 10bit (0-1023 resolution) USB pedal set. Works with our Load cell mod kits.
$39.00
LAST OF CURRENT MODEL - Upgrade your T3PA-Pro pedals with Thrustmaster Brake mod with a 50 Kg Load Cell Plug & Play Pro kit. (MUST HAVE Thrustmaster Brake mod fitted)
$125.00
$145.00
Upgrade your T3PA-Pro pedals that do not have a Thrustmaster Brake mod fitted by replacing the old potentiometer style brake with a 50Kg load cell.
$145.00
Thrustmaster USB pedal adapter for PC. (USB adapt)
This device converts your standard Thrustmaster pedals into USB to run on PC.

Features:

* No Drivers.
* PC only.
* No power required (uses USB power).
* Compatible with USB 2.0 and greater.
* Converts 8 bit (0-255) to 10 bit (0-1023).
* Pedals plug directly into the adapter.
* Increase lap times and control with higher resolution.

Why is the pedal sensitivity increased when using a USB adapter?

The standard pedals send a signal range of 256 possible steps to the wheelbase for pedal position in game whereas using the USB adapter the signal range is increased to 1024 possible steps directly to the game thus increasing the sensitivity of the pedal positioning data.  

To calibrate run the inbuilt Windows joystick calibration tool. instructions here.

Just plug your pedals into the adapter and the USB cable into the PC.

THAT’S it YOUR DONE!! Easy !!!

last updated 7/03/2021
Convert your T3PA, T-GT and T3PA Pro pedals into a 10bit (0-1023 resolution) USB pedal set. Works with our Load cell mod kits.
$39.00
PPP-LC-5 T3PA-Pro 50Kg Load Cell Kit (Plug & Play) (PPP-LC-5)
35% PRICE DROP- LAST ONE - new models coming!!!

Please note the design is constantly evolving and improving, the photos are explanation only and may not reflect the actual product received.
 

ALSO REQUIRES THE THRUSTMASTER BRAKE MOD INSTALLED

 Adjustable pedal position.
 USB Saver —Plugs into the wheelbase.
 Adds more pressure to a set of pedals that normally has a light brake.
 Better feeling race car like pedal with better pedal modulation.
 Maintains cross compatibility—Xbox/PS4/PC.
 Plug & Play and easy to Install, like a factory mod.
 Can race in shoes.
 Also works when pedals are Inverted.
 Very reduced pedal throw.
 LOAD CELL strength 50Kg.
 Adjustable sensitivity at the wheel base.
 Lower lap times making you faster.
 Works with Leo Bodnar USB adaptor.

Watch a review of the ELC-5 model T3PA-Pro Load Cell Kit, by Shaun Cole of "The Simpit". Operation is the same but with harder pedal and shorter pedal movement.

https://www.youtube.com/watch?v=uniCufaRY3Y

Includes the load cell with mount and control electronics, 10mm bolt and washer, 2 x ties and 1 x spare cup with rubber buffer.

As with all versions this load cell kit replaces the existing potentiometer with a Load Cell and electronics and adjustment potentiometer mounted on the load cell control box.

Unlike the T3PA-Pro (Non Plug & Play) version this kit does NOT require the pedals to be dis-assembled to install the mod. Simply mount the load cell kit on to the Thrustmaster Brake mod bracket, plug the original pedal cable into the control box and plug the load cell cable into the load cell socket then plug the control box cable into your wheel base.

Download the install manual here.
last updated 15/05/2021

       
THRUSTMASTER SPRING OR CONICAL RUBBER BRAKE MOD
LAST OF CURRENT MODEL - Upgrade your T3PA-Pro pedals with Thrustmaster Brake mod with a 50 Kg Load Cell Plug & Play Pro kit. (MUST HAVE Thrustmaster Brake mod fitted)
$125.00
$145.00
ELC-5 T3PA-Pro 50Kg Load Cell Kit (ELC-5)
35% PRICE DROP WHILE STOCKS LAST

Please note the design is constantly evolving, the photos are explanation only.
 

For T500 pedal owners, please check this before ordering.

This mod was designed for the earlier set of pedals (including T500 pedals) that did not have a Thrustmaster brake mod (see pics below), but can be fitted to later model pro pedals if you prefer a lighter pedal with almost the same travel as the original.

Watch a review of an earlier version of the T3PA-Pro Load Cell Kit, by Shaun Cole of "The Simpit".

https://www.youtube.com/watch?v=uniCufaRY3Y

 USB Saver —Plugs into the wheel base.
 Adds more pressure to a set of pedals that normally has a light brake.
 Better feeling pedal with better pedal modulation.
 Maintains cross compatibility—Xbox/PS4/PC.
 Easy to Install, like a factory mod.
 Can race in shoes.
 Also works when pedals are Inverted.
 Maintains a good pedal throw.
 Works in GT or inverted style pedal positions.
 Load Cell strength = 50Kg.
 Lower lap times making you faster
 Works with Leo Bodnar USB Adaptor

The kit includes the load cell and electronics. 

1. Load cell mounted in a frame that also houses the electronics and adjustment control.
2. Cabling.
3. Buffer block and nylon tie etc.

The electronics is mounted in the load cell frame with the control potentiometer used to calibrate and fine tune just how you want your brake to feel. The electronics housed in the load cell frame converts the tiny changes in the load cell into a 0—3V variable signal that the wheelbase can understand.

The installation does NOT require the cutting of any wires as the existing cable from the pedals is plugged into the load cell making this a plug and play kit with some disassembly of the pedals required.

Download the install manual here.
Last updated 15/05/2021

         
Upgrade your T3PA-Pro pedals that do not have a Thrustmaster Brake mod fitted by replacing the old potentiometer style brake with a 50Kg load cell.
$145.00
Per Page      1 - 3 of 3
  • 1