T3PA-Pro

Sort By:  
Upgrade your T3PA-Pro pedals that do not have a Thrustmaster Brake mod fitted by replacing the old potentiometer style brake with a 50Kg load cell.
$145.00
Upgrade your T3PA-Pro pedals with Thrustmaster Brake mod with a 50 Kg Load Cell Plug & Play Pro kit. (MUST HAVE Thrustmaster Brake mod fitted)
$145.00
ELC-5 T3PA-Pro 50Kg Load Cell Kit
Please note the design has changed so the photos are explanation only. (pics updated soon)

For T500 pedal owners, please check this before ordering.

This mod was designed for the earlier set of pedals (including T500 pedals) that did not have a Thrustmaster brake mod (see pics below), but can be fitted to later model pro pedals if you prefer a lighter pedal with almost the same travel as the original.

Watch a review of the T3PA-Pro Load Cell Kit, by Shaun Cole of "The Simpit".

https://www.youtube.com/watch?v=uniCufaRY3Y

 Great mod for Thrustmaster Users.
 USB Saver —Plugs into the wheel base.
 Adds more pressure to a set of pedals that normally has a light brake.
 Better feeling pedal with better pedal modulation.
 Maintains cross compatibility—Xbox/PS4/PC.
 Easy to Install, like a factory mod.
 Can race in shoes.
 Also works when pedals are Inverted.
 Maintains a good pedal throw.
 Works in GT or inverted style pedal positions.
 Adjustable sensitivity at the wheel base.
 Load Cell strength = 50Kg.
 Lower lap times making you faster
 Works with Leo Bodnar USB Adaptor

The kit includes the load cell and electronics and a remote adjustment box. 

1. Load cell mounted in a frame that also houses the electronics.
2. Adjustment controller, mounted near the wheel base.
3. Cabling.
4. Buffer block and nylon tie etc.

As the electronics is mounted in the load cell frame the control remotely mounted near the wheelbase which houses the potentiometer used to calibrate and fine tune just how you want your brake to feel. The electronics housed in the load cell frame converts the tiny changes in the load cell into a 0—3V variable signal that the wheelbase can understand.

The installation does NOT require the cutting of any wires as the existing cable from the pedals is plugged into the load cell making this a plug and play kit with some disassembly of the pedals required.

Download the install manual here.
Last updated 28/06/2020

         
                                  (Updated pics of new model will be posted soon)
Upgrade your T3PA-Pro pedals that do not have a Thrustmaster Brake mod fitted by replacing the old potentiometer style brake with a 50Kg load cell.
$145.00
PPP-LC-5 T3PA-Pro 50Kg Load Cell Kit (Plug & Play)
Please note the design has changed so the photos are explanation only. (pics updated soon)

ALSO REQUIRES THE THRUSTMASTER BRAKE MOD INSTALLED

 Great mod for Thrustmaster Users.
 Adjustable pedal position.
 USB Saver —Plugs into the wheelbase.
 Adds more pressure to a set of pedals that normally has a light brake.
 Better feeling race car like pedal with better pedal modulation.
 Maintains cross compatibility—Xbox/PS4/PC.
 Easy to Install, like a factory mod.
 Can race in shoes.
 Also works when pedals are Inverted.
 Very reduced pedal throw.
 LOAD CELL strength 50Kg.
 Adjustable sensitivity at the wheel base.
 Lower lap times making you faster.
 Works with Leo Bodnar USB adaptor.

Watch a review of the T3PA-Pro Load Cell Kit, by Shaun Cole of "The Simpit".

https://www.youtube.com/watch?v=uniCufaRY3Y

Includes the load cell with mount and control box.

As with all versions this load cell kit replaces the existing potentiometer with a Load Cell and electronics and adjustment potentiometer mounted in a remote control box somewhere near the wheel base (up to you).

Unlike the T3PA-Pro (Non Plug & Play) version this kit does NOT require the pedals to be dis-assembled to install the mod. Simply mount the load cell kit on to the Thrustmaster Brake mod bracket, plug the original pedal cable into the control box and plug the load cell cable into the load cell socket then plug the control box cable into your wheel base.

Download the install manual here.
last updated 28/06/2020

       
THRUSTMASTER SPRING OR CONICAL RUBBER BRAKE MOD
Upgrade your T3PA-Pro pedals with Thrustmaster Brake mod with a 50 Kg Load Cell Plug & Play Pro kit. (MUST HAVE Thrustmaster Brake mod fitted)
$145.00
Per Page      1 - 2 of 2
  • 1